Ready To Run Price List
Only the Weinig Custom Grinding Service offers product layout, template and knife production by Weinig technicians experienced in the operation of both moulders and grinders. All of our precision profile knives are produced according to the Weinig Axial Constant System, which can reduce setup time by 50% on any throughfeed moulder.
And all knives are ground from Weinig knife steel (SRS, M3+, SUPRE, TCT Inlaid, or Carbide Double Back) with 16/60° precision corrugations. Knives are balanced, ground to the angle of your choice and packaged in sets.
Put them in your heads and you are ready to run!
Price Per Inch Includes Knives Cut From Steel Type In Description And Templates!
New Profile And Straight Knives:
(Complete with finish grind and ready for production.) | Price Per Lineal Inch
(Calculated to nearest 1/2") |
SRS Knife Steel - Economy Grade For Short Runs
SRS Profiled Knife (up to and including 2" width) | 16.00 |
| SRS Profiled Knife (2 3/8" width) | 18.00 |
| SRS Profiled Knife (2 3/4" width) | 20.00 |
M2 HSS 1/4" Thick Knife Steel
M2 1/4" HSS Profiled Knife (up to and including 2" width) | 19.00 |
| M2 1/4" HSS Profiled Knife (2 3/8" width) | 21.00 |
| M2 1/4" HSS Straight Knife (1 1/2" width) | 9.00 |
M3+ Knife Steel
M3+ HSS Profiled Knife (up to and including 2" width) | 20.00 |
| M3+ HSS Profiled Knife (2 3/8" width) | 23.00 |
| M3+ HSS Profiled Knife (2 3/4" width) | 26.00 |
| M3+ HSS Straight Knife (1 1/2" width) | 10.00 |
SUPRE-18XL Knife Steel
SUPRE-18XL Profiled Knife (up to and including 2" width) | 21.00 |
| SUPRE-18XL Profiled Knife (2 3/8" width) | 24.00 |
| SUPRE-18XL Profiled Knife (2 3/4" width) | 27.00 |
| SUPRE-18XL Straight Knife (1 1/2" width) | 11.00 |
TCT Carbide Inlaid Knife
TCT Profiled Knife (2" width) | 47.00 |
| TCT Profiled Knife (2 3/8" width) | 67.00 |
| TCT Straight Knife (1 1/2" width) | 32.00 |
Double-Back Carbide Sets & Knives
Double-Back Carbide Profiled Knife (2" width - backer plate & profile knife) | 53.00 |
| Double-Back Carbide Profiled Knife (2 3/8" width - backer plate & profile knife) | 66.00 |
| Double-Back Carbide Straight Knife (1 1/2" width - backer plate & straight knife) | 40.00 |
| Double-Back Carbide Profiled Knife (2" width - profile knife only) | 44.00 |
| Double-Back Carbide Profiled Knife (2 3/8" width - profile knife only) | 57.00 |
| Double-Back Carbide Straight Knife (1 1/2" width - straight knife only) | 32.00 |
| Knife Regrinding: | Price US$
Per Lineal Inch |
| M3+ HSS Profile Knives | 6.00 |
| M3+ HSS Straight Knives | 2.50 |
| TCT Inlaid Carbide Profile Knives | 13.00 |
| TCT Inlaid Carbide Straight Knives | 6.50 |
| Double-Back Carbide Profile Knives | 13.00 |
| Double-Back Carbide Straight Knives | 6.50 |
Now Available:
Custom-ground knives for shapers and Williams & Hussey moulders.
For more information, contact:
Weinig Grinding Service Department
Email:grinding@weinigusa.com
Grinding Service Fax: 1-704-663-2468 Error: could not place call
Error: could not place call
Home
