CombiScan+ S - Sorting at the highest level

WEINIG renews its expertise in the area of high performance scanners for sorting and color matching with the S version of the Combiscan+.  Through the different sensor options the scanner can be matched to the needs of the customer, continually providing the optimal results. Hardwood or softwood, color sorting or sorting for panels, profiled or rough products. With the Combiscan+ S you are prepared for the future.
 

YOUR ADVANTAGES -

• High productivity from the automated characteristic recognition.
• Reduction in personnel costs, as the labor intensive manual sorting is replaced.
• Increase in yield and quality because the scanner is much more consistent than manual sorting.
• Flexible production, as many different qualities and products can be produced at the same time.
• Increase in quality of the end products as well as grading rules according to your individual end customer requirements.

Modern scanner technology from the WEINIG optimization specialists -

The deciding factor in a targeted optimization of the raw material is the optimal detection of the wood characteristics. The features of the individual wood characteristics are different in the way in which they are detected by the various sensors. The scanners modular sensor concept is derived from these factors.

Here WEINIG can offer each customer a tailored solution. From the modular construction of the Combiscan+, different sensor technologies can be combined together. Machines can be produced according to the customer demands with the perfect sensor combination and at the same time offering the best value for your money.

The installed laser cameras provide recognition of standard characteristics on all 4 sides. Color characteristics are captured and identified with a high definition color camera. Not only is the detection of blue stain possible, but also an optimized sorting according to color characteristics. For example, the slats for multiple layer panels or door core can be classified and sorted before pressing.

For characteristics exhibiting a difference in density an X-Ray sensor is used. This provides, by "lighting up" the wood, a glimpse into the heart and classification of the density. Sensors for detecting shape differences, moisture and unplaned or scant areas complete the picture along with the specialized mechanization concept. This provides the scanner with automatically moving cameras for use in scanning random width boards. This allows for continued, three-dimensional characteristic detection on the edges, even on random widths. This technology is unique in its application. With the offered sensor concepts and the modular construction the Combiscan+ will be easily adaptable to all new demands in your production.

Opticore - the new benchmark in the world of automated optimization -

Along with the sensors such as laser and color cameras, X-Ray and crook measurement, etc. the software plays the most important part of cross cut optimization. Important here is simple operation, comfort and accuracy. The system should be simple to understand, intuitive to operate and reliable in availability and performance.

The new Opticore software exceeds all these requirements. The optical and operative side of the software is accessed using a 17" touch screen computer with an easy to operate and intuitive interface. In addition to this, Opticore offers the tried and tested optimization structure which allows you to create specific run parameters as quickly and easily as you can run the production.

Opticore is capable of handling an unlimited number of products and qualities. The simple description of qualities using different zones allows for an increase in production as well as providing the customer the possibility to implement a larger range of diverse products.

A more accurate description of the qualities allows production of more specific products. Along with the high accuracy in measurement of the different characteristics these bring about a much more efficient use of the raw materials.

The different optimizing modes - optimizing according to value, yield or production targets - make scanning technology even more interesting. This way production number targets can be set which can all be completed at the same time. Production of orders with set piece lists also provides no problems. The shared software platform also provides a synergy effect in controlling the machines. This means even the status of the Opticut stackers during production can be taken into account during the optimization. 

This is just a further example of current WEINIG high-technology. With this you are always prepared for future developments and challenges.

 Sorting and color matching either in-line or separately.

 Advanced Sensor Technology

 17" Touch Screen Interface




Complete Reporting And Production Tracking Software