Combiscan+ R - Intelligent Ripping
Combiscan+ R - Rip optimization with meaning and
intelligence. In the R version of the Combiscan+
Luxscan once again increases the efficiency of
scanner technology for ripping applications. Two
dimensional optimization of the board significantly
increases the return from each board. Also, the
cross cut optimization is already implemented during
the rip optimization. In this instance the cross cut
scanner and the rip scanner work hand in hand.
The sensor options are carried over from the
successful Combiscan + C, which means that there is
also a wide range of sensors and options available
for the Combiscan+ R. The crook detection and the
module for random width is integrated as standard.
Due to the nature of ripping the detection and the
optimization is only carried out on the top and
bottom surfaces.
YOUR ADVANTAGES -
- High productivity from the automated defect
recognition.
- Reduction in personnel costs, as the labor
intensive manual marking and positioning is replaced.
- Increase in yield as the two dimensional
optimization of the scanner can also calculate later
cross cut solutions
- Flexible production, as many different qualities and
products can be produced at the same time.
- Increase in quality of the end products as well
as grading rules
according to your individual end customer
requirements.
Modern scanner technology from the WEINIG
optimization specialists -
The deciding factor in a targeted optimization of
the raw material is the optimal detection of the
wood characteristics. The features of the individual
wood characteristics are different in the way in
which they are detected by the various sensors. The
scanners modular sensor concept is derived from
these factors.
Here WEINIG can offer each customer a tailored
solution. From the modular construction of the
Combiscan+, different sensor technologies can be
combined together. Machines can be produced
according to the customer demands with the perfect
sensor combination and at the same time offering the
best value for your money.
The installed laser cameras provide recognition of
standard characteristics on two sides. Color
characteristics are captured and identified with a
high definition color camera. Not only is the detection of blue
stain possible, but also an optimized sorting
according to color characteristics. For example, the
slats for multiple layer panels or door core can be
classified and sorted before pressing.
For characteristics exhibiting a difference in
density an X-Ray sensor is used. This provides, by
"lighting up" the wood, a glimpse into the heart and
classification of the density. Sensors for detecting
shape differences, moisture and unplaned or scant
areas complete the picture along with the
specialized mechanization concept. This provides the
scanner with automatically
moving cameras for use in scanning random width
boards. This allows for continued, three-dimensional
characteristic detection on the edges, even on
random widths. This technology is unique in its
application. With the offered sensor concepts and
the modular construction the Combiscan+ will be
easily adaptable to all new demands in your
production.
Opticore - the new benchmark in the world of
automated optimization -
Along with the sensors such as laser and color
cameras, X-Ray and crook measurement, etc. the
software plays the most important part of cross cut
optimization. Important here is simple operation,
comfort and accuracy. The system should be simple to
understand, intuitive to operate and reliable in
availability and performance.
The new Opticore software exceeds all these
requirements. The optical and operative side of the
software is accessed using a 17" touch screen
computer with an easy to operate and intuitive
interface. In addition to this, Opticore offers the tried and tested optimization
structure which allows you to create specific run
parameters as quickly and easily as you can run the
production.
Opticore is capable of handling an unlimited number
of products and qualities. The simple description of
qualities using different zones allows for an
increase in production as well as providing the
customer the possibility to implement a larger range
of diverse products.
A more accurate description of the qualities allows
production of more specific products. Along with the
high accuracy in measurement of the different
characteristics these bring about a much more
efficient use of the raw materials.
The different optimizing modes - optimizing
according to value, yield or production targets -
make scanning technology even more interesting. This
way production number targets can be set which can
all be completed at the same time. Production of
orders with set piece lists also provides no
problems. The shared software platform also provides
a synergy effect in controlling the machines. This
means even the status of the Opticut stackers during
production can be taken into account during the
optimization.
This is just a further example of current WEINIG
high-technology. With this you are always prepared
for future developments and challenges.
|
Optimum Ripping AND Crosscutting Solutions At The
Same Time
Advanced
Sensor Technology
Automatic Random Width Scanning Standard
17"
Touch Screen Interface
Complete Reporting And Production Tracking Software |
Home
Moulders & Planers
