Combiscan+ C – THE scanner for your cross cut optimization

In the C version of the Combiscan+ Luxscan draws all its experience gathered in the area of cross cut optimization together into one single package. The CombiScan+ C is based on the tried and tested CombiScan model and is a four sided scanner for detecting various characteristics in wood such as wane, knots, cracks, pith, resin pockets, blue and red stain and other important defects.

YOUR ADVANTAGES -

• High productivity from the automated defect recognition.
• Reduction in personnel costs, as the labor intensive manual marking is replaced.
• Increase in yield as the defect recognition of the scanner is far above that of manual marking.
• Flexible production, as many different qualities and products can be produced at the same time.
• Increase in quality of the end products as well as grading rules according to your individual end customer requirements.

It is fitted with Multi-Scan technology - laser profile measurement, dimension measurement and is network compatible. With the new, compact construction it has been possible to simplify the operation of the scanner without sacrificing anything in the area of maintenance access. Designed for now and for the future, it also means that additional options like the X-Ray module can be integrated at any time as a cost effective option.

Modern scanner technology from the optimization specialists of the WEINIG GROUP.

The deciding factor in a targeted optimization of the raw material is the optimal detection of the wood characteristics. The features of the individual wood characteristics are different in the way in which they are detected by the various sensors. The scanner modular sensor concept is derived from these factors.

Here LUXSCAN can offer each customer a tailored solution. From the modular construction of the Combiscan+ different sensor technologies can be combined together. Machines can be produced according to the customer demands with the perfect sensor combination and at the same time offering the best value for your money.

The installed laser cameras provide recognition of standard characteristics on four sides. What is interesting here is the four-sided detection of three dimensional characteristics such as wane are accurately captured. Color characteristics can also be captured and identified with a high definition color camera. Not only is the detection of blue stain possible, but also an optimized sorting according to color characteristics. For example, the slats for multiple layer panels or door core can be classified and sorted before pressing.

For characteristics exhibiting a difference in density an X-Ray sensor is used. This provides, by “lighting up” the wood, a glimpse into the heart and classification of the density. Sensors for detecting shape differences, moisture and unplaned or scant areas complete the picture along with the specialized mechanization concept. This provides the scanner, as an optional module, with automatically moving cameras for use in scanning random width boards. This allows for continued, three-dimensional characteristic detection on the edges, even on random widths. This technology is unique in its application. With the offered sensor concepts and the modular construction the Combiscan+ will be easily adaptable to all new demands in your production.

Opticore – the new benchmark in the world of automated optimization -

Along with the sensors such as laser and color cameras, X-Ray and crook measurement, etc. the software plays the most important part of cross cut optimization. Important here is simple operation, comfort and accuracy. The system should be simple to understand, intuitive to operate and reliable in availability and performance.

The new Opticore software exceeds all these requirements. The optical and operative side of the software is based on the OptiCom direct software from DIMTER meaning that the operation of both machines is almost identical. In addition to this, Opticore offers the tried and tested optimization structure which allows you to create specific run parameters as quickly and easily as you can run the production.

Opticore is capable of handling an unlimited number of products and qualities. The simple description of qualities using different zones allows for an increase in production as well as providing the customer the possibility to implement a larger range of diverse products.

A more accurate description of the qualities allows production of more specific products. Along with the high accuracy in measurement of the different characteristics these bring about a much more efficient use of the raw materials.

The different optimizing modes – optimizing according to value, yield or production targets – make scanning technology even more interesting. This way production number targets can be set which can all be completed at the same time. Production of orders with set piece lists also provides no problems. The shared software platform also provides a synergy effect in controlling the machines. This means even the status of the Opticut stackers during production can be taken into account during the optimization. 

This is just a further example of current WEINIG high-technology. With this you are always prepared for future developments and challenges.

 Endless Optimization Possibilities

 Advanced Sensor Technology

Automatic Random Width Scanning

 17" Touch Screen Interface