High speed and flexibility - 2 moulders in one!

In the past, if you needed to make some short runs and also some long high speed runs, you either needed 2 machines or lose efficiency on your fast moulder.

The Powermat 2000 combines the best of both worlds. Available with jointing at 10,000 RPM, the Powermat 2000 can be run up to 250 ft. per minute with only 4 knives, probably half the knives you use now. When the short runs pop up, the Powermat 2000 is faster than an unjointed machine.

When equipped with automated setup systems like PowerCom, our customers report that changeover time is so fast that they can produce a short run before the product from the previous long run is finished being tied up, packaged, and moved away. Instead of waiting for material to be moved, run something else!

No outboard bearings, no hydro heads, no grease guns, no collars, no spacers, no hassle. Run your existing knives and use the jointing stones you already have.

Available in hundreds of configurations, the Powermat 2000 can be equipped with multiple spindles on any side. Perfect for high speed runs and the possibility to change profiles without shutting off the machine.

The Powermat 2000 moulder will change the way you think about your production.

Highlights:

Excellent capacity potential
Perfect surface quality at fast or slow speeds
Shortest setup time
High accuracy and detail
Fast and easy to operate
Integrated sound and safety enclosure
Easy integration into automated lines or work flows

Excellent profile quality at speeds up to 250 ft. per minute.

Powermat 2000

Profile and straight knife jointers for high speed moulding and planing.

Profile & Straight Jointers

Powercom touch screen controller with software to organize your profiles and increase production.

Powercom Control System

High speed and flexibility - 2 moulders in one! In the past, if you needed to make some short runs and also some long high speed runs, you either needed 2 machines or lose efficiency on your fast moulder.

The Powermat 2000 combines the best of both worlds. Available with jointing at 10,000 RPM, the Powermat 2000 can be run up to 250 ft. per minute with only 4 knives, probably half the knives you use now. When the short runs pop up, the Powermat 2000 is faster than an unjointed machine.

No outboard bearings, no hydro heads, no grease guns, no collars, no spacers, no hassle. Run your existing knives and use the jointing stones you already have.

The Powermat 2000 moulder will change the way you think about your production.

High speed and flexibility - 2 moulders in one!

In the past, if you needed to make some short runs and also some long high speed runs, you either needed 2 machines or lose efficiency on your fast moulder.