|
|
|
For an
introduction to the various models, refer to our Product
Information pages
Images shown are representative of the model described for
informational purposes only, but are not pictures of the
actual machine listed.
|
|
|
 |
I.D. Number
|
Year
|
Price
in U.S. $
|
|
U-356
|
2002
|
$40,000 |
|
Description
|
Unimat 1000/017
Feed speed 20 - 120 ft. per min., 5 spindle configuration, spindle diameter
1 13/16", 230 Volts, Central Lube, 6000 RPM #1 and 8000 RPM all other
spindles, 6'6" in-feed table, manual waxilit pump, Inverter Feed motor - 10
hp, #1 Bottom =10HP - #2 Right =15HP - #3 Left=15HP, #4 Top =25HP - #5
Bottom= 20HP. Re-Dial system for setting spindles, and pressure elements,
Spindle brakes for all spindles, powered out-feed roller in machine table,
heavy duty cast base machine. interior light, Chrome table plates and
fences, NOT RECONDITIONED - AS IS-WHERE IS. FOB Mooresville, N.C.
|
|
|
I.D.
Number
|
Year
|
Price
in U.S. $
|
|
U-357
|
2002
|
$60,000 |
|
Description
|
Unimat
1000/018
Feed speed 20 - 120 ft. per min., 6 spindle configuration, spindle diameter 1
13/16", 440 Volts, Central Lube, 6000 RPM #1 and 8000 RPM all other
spindles, Short 3 ft. in-feed table,
automatic waxilit pump, Inverter Feed motor-10 hp, #1 Bottom=10HP-#2 Right=15HP-#3 Left=15HP, #4 Top=20HP-#5
Top=25HP, #6 Bottom= 20HP.
Re-Dial system for setting spindles, and pressure elements, Spindle brakes
on all spindles, powered out-feed roller in
machine table, heavy duty cast base machine. multi height pressure shoe, 2 interior lights,
NOT RECONDITIONED - AS IS-WHERE IS. FOB Mooresville, N.C.
|
|
 |
I.D Number
|
Year
|
Price in
US $
|
| U-360 |
2002 |
$ 50,000 |
|
Description
|
Hydromat 23C/001
5 spindle machine, feed speed 120 fpm, 1 13/16" spindles, 6000 RPM, 440v 3 phase
electrics, manual waxilit pump, 4 ft. in-feed table,
#1 bottom = 15hp, #2 right = 10hp, #3 left = 10hp, #4 top = 20hp, #5 last bottom
= 15hp, feed motor = 7 1/2hp, spindle brakes #1-#5, straight jointer #1, profile
jointers #2 - #5, outboard bearings #4-#5, interior light, central lube,
NOT RECONDITIONED - AS
IS-WHERE IS. FOB Mooresville,
N.C. |
|
|
I.D
Number
|
Year
|
Price in
US $
|
| U-362 |
1997 |
$ 40,000 |
|
Description
|
Hydromat 23/001
5 spindle configuration, feed speed of 120 fpm, 1 13/16" spindles, 6000
RPM, 440v 3 phase
electrics, automatic waxilit pump, Ambi-tech spindle brakes #1-#5,
#1 bottom=15hp, #2 right=10hp, #3 left=10hp, #4 top=20hp, #5 last bottom = 15hp, feed motor=7
1/2 hp, straight jointer #1, profile
jointers #2 - #5, 2 interior lights, central lube,
4 ft. in-feed
table,
NOT RECONDITIONED - AS IS-WHERE IS. FOB Mooresville,
N.C. |
|
Used
Grinders