|
|
|
Machines Listed
By Our Agents & Customers
The following machines are sold directly
by our agents or customers. Please direct any questions regarding this
machinery to the contact mentioned below. Weinig does not have ANY
involvement or responsibility in machine sales listed in this section.
 |
I.D
Number |
Year |
Price in Canadian $ |
| X - 155 |
New |
$59,900 CDN |
|
Description |
|
New Weinig Unimat 500 Showroom Model.
Serial Number: 107049 - Feed 4 Hp - 1st bottom 10hp - 2nd/3rd 10hp - 4th
15hp - 5th 10hp
Electrics of 600V/3ph - Electronic readout for all spindles - Electronic
Digiset on left spindle - Electronic readout on top spindle ship breaker
and pressure shoe - Electronic smart brakes - Manual waxilit pump -
Inverter feed speed 20-100 fpm - 40mm spindle, 6000rpm - Feed beam
motorized up/down - Receding chipbreaker on top spindle - Feed wheel
before first bottom pneumatically positioned - Lateral pressure rollers
opposite right spindle - Pressure rollers from above - Table insert,
hardened in front of 1st bottom spindle - Central lubrication - Driven
table roller at out feed - Electrical cabinet, including operator
controls, attached to machine - Memory system.
Installation is still valid and included. F.O.B. Winnipeg, Manitoba (we
will load, no additional charge), Taxes: extra, if applicable.
Contact: Chris Caligiuri - F.C. Machinery Ltd. - Phone: (204) 233-3070 |
 |
I.D
Number |
Year |
Price in
US $ |
| X - 156 |
1989 |
$1,800 |
|
Description |
|
Weinig OMA Measuring Stand -
Serial Number 970-573 - Can be seen in operation.
Winell Lee Lumber & Building Supply Company
9421 Old Baxter Road
Baxter, TN 38544 - Contact: Mr. Shea Lee
Cell: 931-510-6632 |
|
 |
I.D
Number |
Year |
Price in
US $ |
| X - 154 |
2003 |
$48,000 |
|
Description |
|
2003 Dimter S75 Push Feed Optimizing Cross Cut Saw.
Infeed system w/automatic pusher arm (14;9" infeed) - RH version -
Optimization Equipment Package - Magnetic Meter Rule,
+/-1/64" accuracy package - Width Measuring Device - Fixed Outfeed
Table, 2.5 meter - Computer Stand and PC - Label Printer - Millvision
Lite Software.
Detailed pictures available. Contact: James Scarlett - Phone:
616-308-9800 |
|
 |
I.D
Number |
Year |
Price in
US $ |
| X - 150 |
1982 |
$11,500 |
|
Description |
|
Weinig Moulder Model 17A
6 spindles in the following sequence: First bottom 7.5 HP, second right
7.5 HP, third left 10 HP, fourth right 7.5 HP, fifth top 15 HP, sixth
bottom 10 HP. 170mm width capacity with 7' infeed table. Carden (shaft)
feed system for speeds up to 75 fpm from 5 1/2 HP motor. 6,000 rpm
spindles at 1 1/2" diameter. Large lot (37) of heads included. Machine
equipped with EM4 hopper feed (currently not used) and a set of groove
guide table plates (not installed). 440 volt 3 phase electrics. 1982
machine in good operating condition.
Detailed pictures available. FOB: Michigan - Contact: Jim Scarlett -
Scarlett Machinery - Phone: 616-871-9889
Email:
info@scarlettinc.com |
 |
I.D
Number |
Year |
Price in
US $ |
| X - 149 |
1990 |
$22,500 |
|
Description |
|
Weinig Moulder Model 22 AL-11
5 heads with 220mm width capacity and short infeed table. Bottom 10
HP, right 10 HP, left 10 HP, top 20 HP and bottom 15 HP head
configuration. 1 13/16" spindle diameter at 6,000 rpm. Profile jointers
on heads 2, 3, 4 & 5 to a maximum width of 5 1/2". Mechanical feed from
10 HP motor to Cardan Drive from 25-130 FPM. Manual Waxilit lubrication
system. 440 volt 3 phase electrics. 1990 machine in good condition.
Detailed pictures available. FOB: Michigan - Contact: Jim Scarlett -
Scarlett Machinery - Phone: 616-871-9889
Email:
info@scarlettinc.com |
|
I.D Number |
Year |
Price in
US $ |
|
X - 147 |
1999 |
$21,000 |
|
Description |
Raimann KM 310 US -
With QuickFix arbor and 2 lasers. Includes transformer for 480 volt
operation. Standard Weinig specifications. As taken from service in good
working order.
Contact Ralph Kemker. Phone 801-433-0534 Ext 103 or email:
rkemker@archstairs.com
|
|
|
I.D Number
|
Year
|
Price in
US $
|
|
X-135 |
1999 |
$ 125,000 |
|
Description
|
|
GreCon Dimter Ultra Six Finger Jointer -
This
machine includes a 20 ft. Dual Track Press, adjustable down to 6 ft, hydraulic
press rollers, automatic transfer section, dual shaper units, trim saws & heavy
duty horse powers. This package machine can handle "packs" up to 24" wide.
Machine has been well maintained, and a video may be viewed at
www.mouldingsunlimited.com.
Machine includes "set-up" by a Weinig Tech (USA & Canada only) and is FOB North
Georgia. Offered "as-is, where-is", sells new for $ 330,000+, Please call Reid
Dunn Sr. for details at (770) 383-8100
|
|
|
